Electrician Marketing for Electrical Contractors Fill the board with the electrical work you want to do.
Electrician marketing at StrivStudio is built for contractors who already have work and want more of the right work. The site, the local SEO, the Google Ads account, the AI intake and the Google Business Profile sit with one team, and each of them sorts inquiries by job type before they reach your phone.
Short answer: Electrician marketing brings an electrical contractor the commercial and residential jobs it wants by running its site, local SEO, paid search and Google Business Profile as one system, then sorts each inquiry by job type so panel upgrades, EV charger installation and troubleshooting calls each reach the right next step.
What this work includes
- Inquiries sorted by job type before you call back
- Panel upgrade and EV charger pages with clear steps
- Separate paths for commercial and residential buyers
- License and insurance shown where buyers decide
Sort the work before it reaches your phone
Most electricians are not short of calls. They are short of the right calls, so electrical contractor marketing should filter as much as it attracts. Every form, ad and assistant conversation starts with the same question: what kind of work is this.
- Four different pathsA breaker that will not reset, a panel upgrade, an EV charger installation and a tenant fit-out for an office each go down a different path.
- Different questionsEach path asks its own questions and ends with a different next step, so the inquiry is sorted before anyone calls back.
- You set the mixYou decide which work you want more of and which you would rather refer out.
- Budget and copy followThe budget and the copy follow that decision across the site, the ads and the Google Business Profile.
01Troubleshooting2
- Breaker will not resetService call
- Half the outlets deadService call
02Panel upgrades1
- Panel upgrade, older homeUpgrade
03EV chargers1
- Charger bought, garage mountEV charger
04Commercial bids1
- Office tenant fit-outBid request
Step by step
How electrician marketing gets set up
The work starts from one decision you make: which electrical jobs you want more of and which you would rather refer out. Every page, campaign and intake question is built around that choice.
Get in contact
You get in contact and tell us which work fills your board today and which jobs you want more of, from panel upgrades to commercial bids.
YouDiscovery call
On a short discovery call we agree the scope and the price: the channels you need, your service area and whether commercial is marketed alongside residential.
You and usSee the homepage first
You approve the scope and the price before any paid work begins, and when the site is part of the work you see a homepage preview for your electrical business first.
Before paid workBuild the job-type paths
We build the upgrade, EV charger and troubleshooting pages, the commercial section, the ads and the assistant's questions, each one sorting inquiries by job type.
We buildReport and adjust
We report by job type, change ad groups that keep bringing calls you skip and build next to the pages that bring the jobs you want.
Ongoing
We reply within one business day, and the scope is agreed before any work begins.
Get in ContactPanel upgrades and EV chargers are planned purchases
Panel upgrades and EV charger installation are researched purchases, and the homeowner often arrives with questions about capacity, permits and timing. Each gets its own page that explains your process in plain terms.
- The site visitThe page walks through the site visit and what the homeowner should have ready.
- Panel capacityIt explains what decides whether the panel can take a charger.
- Permits and inspectionsIt covers how permits and inspections are handled where you work.
- Ads to the matching pageGoogle Ads for these searches send people straight to the matching page.
- Questions before you goThe assistant asks which charger they bought, where it will be mounted and the age of the panel if known, so your estimator walks in prepared.
- Quiet quotes followed upQuiet quotes get follow-up by email and, with consent, by text.
EV charger installation request
Upgrade path- Job type
- EV charger installationForm choice
- Charger
- Already bought, model named by the homeownerAssistant
- Mounting spot
- Garage wall, beside where the car parksAssistant
- Panel age
- Homeowner does not know yet
- Permits
- Explained on the EV charger page before the visitService page
- Follow-up
- Email, and text only with consentQuote follow-up
Your estimator reads this before the site visit, not on the driveway.
Troubleshooting calls need a short path
Troubleshooting calls are urgent and hard to describe, so the path from search to a booked visit has to be short. A homeowner with half the outlets dead will not fill in a long form.
- Phone at the topThe troubleshooting page puts the phone number and a three-field request at the top.
- Hours you coverThe Google Business Profile shows the hours your team actually covers.
- Safety question firstThe assistant asks what stopped working and whether anything is hot, sparking or smells of burning.
- Your script decidesWhen your script says so, it tells the caller to contact emergency services first.
- A photo before the vanIt also invites a photo of the panel label or the tripped breaker, which helps your electrician know what to bring before the van leaves.
What the assistant skipsIt does not give electrical advice or walk anyone through a repair. It collects the details and hands the call to your on-call electrician.
Troubleshooting request
Half the outlets in our kitchen stopped working tonight.8:14 PM
This is the automated assistant for Your Company. Is anything hot, sparking or smelling of burning?8:14 PM
No, nothing like that. Just no power on that side of the room.8:15 PM
Thanks. Could you send a photo of the panel label or the tripped breaker?8:15 PM
Photo added to the request
Got it. Your details and the photo are going to the electrician on call now.8:16 PM
Commercial and residential buyers search differently
Commercial and residential electrical buyers use different words, judge you on different proof and expect a different first step, so they get separate pages and separate campaigns.
One site with a clear commercial section and clear residential pages works for most electrical contractors. A separate site makes sense when the two sides run as different businesses with different teams.
- The homeownerA homeowner searches for an electrician nearby and wants reviews and a quick visit.
- The property managerA property manager or general contractor searches for a commercial electrical contractor and wants the project types you handle, the size of jobs you take and a way to send drawings for a bid.
- Two front doorsWe build a commercial section with its own bid request form and residential pages that lead with booking.
- Campaigns kept apartThe ads keep the two apart, so a homeowner never lands on a bid form.
01Commercial headline
Commercial electrical contractor for your service area
02Project types
Tenant fit-outs and the other project types you handle
03Job sizes you take
The size of jobs you take, stated plainly
04License and insurance
License number and insurance beside the call button
5Bid request form
Send drawings for a bid, kept off the residential pages
Fit
Is this the right kind of marketing for your shop
A good fit if
- You already have work and want more of the right work.
- You want more panel upgrades, EV charger installation or commercial bids on the board.
- You can show your license number, your insurance and paperwork for any membership you list.
- You want commercial and residential buyers kept on separate pages and campaigns.
Not the right fit if
- You want a promised number of panel upgrade jobs or a promised ranking.
- You want the assistant to give electrical advice or troubleshoot with callers.
- You want memberships listed that you cannot show paperwork for.
Show licensed and insured where it counts
Licensed and insured is the first thing many buyers check before letting an electrician into a home or onto a job site, so it sits beside every call button instead of on a buried about page.
- On every channelYour license number and insurance appear on the site, on the Google Business Profile where the format allows and in ad text when it fits.
- Paperwork firstManufacturer or program memberships appear only when you can show us the paperwork.
- Reviews by job typeReviews that mention the work you want more of go on the matching service pages.
- Proof that matchesA panel upgrade buyer reads about panel upgrades and a property manager reads about commercial jobs.
The research
Licensing, ad quality and missed calls: what the sources say
A few published rules bear on how an electrical contractor markets itself. They come from the Bureau of Labor Statistics and from Google's own help pages for advertisers.
Most states
Most states require electricians to pass a test and be licensed, and the requirements vary by state.
Source: U.S. Bureau of Labor Statistics, 20261 to 10
Google Ads reports Quality Score on a 1 to 10 scale built from expected click-through rate, ad relevance and landing page experience.
Source: Google Ads Help, accessed 202620 seconds
With Local Services Ads, a missed call during business hours is charged as a lead if the caller stays on the line more than 20 seconds.
Source: Google Ads Help, accessed 2026
What it meansLicensing is a state rule, so showing your license answers a question many buyers check first. Ad clicks should land on the matching job page, and an unanswered call can still cost you. None of this predicts your results.
Measure by job type, not by lead count
A month with fewer calls can still be a better month if more of them were panel upgrades and commercial bids, so we report by job type first. Inquiries are tracked by type and source, then followed into estimates and booked work where your CRM records allow.
- Separate columnsTroubleshooting volume, upgrade requests and commercial bid requests stay in separate columns.
- Cut the calls you skipWhen an ad group keeps bringing small service calls you do not want, we change it.
- Build next to what worksWhen a service page brings the jobs you want, we build next to it: a second town, a related service or a guide that answers questions buyers raised on the phone.
No lead-count promiseWe do not promise rankings, lead counts, cost per lead or timelines. We report plainly on what each channel brings in, sorted by job type.
Inquiries by job type
- Troubleshooting4
- Upgrade requests3
- Commercial bids1
- Panel upgrade page
- 2 requests
- EV charger ads
- 1 request
- Commercial bid form
- 1 request
Terms
Ad terms that decide which calls you pay for
- Job type
- The kind of work an inquiry is about, such as troubleshooting, a panel upgrade, an EV charger or a commercial bid. We sort and report by it.
- Negative keyword
- A search term excluded from a campaign, so your ads stop showing on searches you do not want, such as small jobs you skip. Source: Google Ads Help, accessed 2026
- Broad match
- The match type Google Ads assigns to every new keyword by default. Source: Google Ads Help, accessed 2026
- Call asset
- A phone number added to a search ad so the searcher can tap to call. Google says call assets can significantly increase click-through rates. Source: Google Ads Help, accessed 2026
Questions buyers ask before starting
Can you cut down the small service calls we do not want?
We can reduce them. Ads can exclude searches for work you skip, pages can say plainly what you do not take, and the assistant can refer small jobs elsewhere or book them into slow days. You set the rules and we apply them on every channel.
Do commercial and residential need separate websites?
Usually not. One site with a clear commercial section and clear residential pages works for most electrical contractors. A separate site makes sense when the two sides run as different businesses with different teams, and we talk that through on the discovery call.
What does the AI tell someone whose panel is buzzing?
Whatever your script says, and nothing more. It can tell the caller to contact emergency services or the utility, then collect details and pass the call to your on-call electrician. It never gives electrical advice, troubleshoots or tells anyone to open a panel.
How much does electrician marketing cost?
There is no fixed package. Price depends on the channels you need, your service area and whether commercial work is marketed alongside residential, and we agree on it during a discovery call. You approve the scope and the price before any paid work begins.
Can you promise more panel upgrade jobs?
No. We do not promise rankings, lead counts, cost per lead or timelines. We build the pages, campaigns and intake that give upgrade buyers a clear reason to choose you, and we report plainly on what each channel brings in.
Related guides
Practical next steps for the same search, website, and conversion problems this service solves.
Explore the next step
Find more guides by goal or tradeKeep going
More for electrical contractors
Guides behind this work
Sources and review
- Electricians, Occupational Outlook Handbook
- About Quality Score, Google Ads Help
- Local Services Ads lead charges, Google Ads Help
- About negative keywords, Google Ads Help
- About broad match, Google Ads Help
- About call assets, Google Ads Help
Reviewed by the StrivStudio team.
Tell us what you want more of. We will take it from there.
Send the business name, your service area and your current website if you have one. We reply within one business day, and the scope is agreed before any work begins.